Instructions:
Whether you're buying pre-drilled 2 X 4's or drilling the holes yourself, installation is a cinch. Check with local authorities for building codes and regulations in your area. Due to differing conditions, tools and individual skills. Austintown Fence assumes no responsibility for damages or injuries.
Step1: Measure rail opening and cut 2 X 4's to length *If using pre-drilleds cut half the measurement off each end and go to step 4.		Step2: Mark holes 4 1/2" on center form center.
Step3: Drill 3/4" deep holes using a 3/4"bit.		Step 4: Set bottom drilled 2 X 4 on 3" blocks and mount to rail post.
Step 5: Caulk holes using silicone 1 caulk and insert balusters.		Step 6: Install top drilled 2 X 4 by working the balustersin eahc hole and tapping down. Then mount to post.
Step 7: Install top 2 X 4 by mounting to top drilled 2 X 4 and post.		Step 8: Attach centerpiece with 2 of the self drilling screws. Use 3rd screw to set the centerpiece baluster by driling through the 2 X 4 and into the baluster.

36" Rail with 26" Baluster	42" Rail with 32" Baluster	48" Rail with 36" Baluster